Filter and sort

Products

Vendor: HUB SHOP USA
3 Inch Dry Core Drill Bit, 5/8"-11 Threaded Core Bits for Concrete, 10" Drilling Depth Laser Welded Diamond Core Drill Bit for Reinforced Concrete Brick Masonry

No reviews

Regular price $59.80
Vendor: HUB SHOP USA
3 PCS 4 1/2 Inch Diamond Blade for Angle Grinder — Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete —

No reviews

Regular price $22.45
Vendor: HUB SHOP USA
3" Dry/Wet Multipurpose Core Bit for Masonry, Concrete and Natural Stone, 6" Drilling Depth, SDS Max Pilot Bit with 5/8"-11 Arbor

No reviews

Regular price $111.64
Vendor: HUB SHOP USA
3" Pro Dry Core Drill Bit with Pilot Bit & 3 Adapters (SDS Plus/Sds Max/1/2 Hex), Upgraded-Welded Blade Core Bits for Concrete with Rebar, Masonry, Brick, Mortar - 9.5" Depth, 5/8"-11 Thread

No reviews

Regular price $99.27
Vendor: HUB SHOP USA
3" Wet Drill Core Bits for Concrete and Hard Masonry, 10Mm Segment Height, 14" Drilling Depth, 1-1/4"-7 Arbor, Wet Only

No reviews

Regular price $80.71
Vendor: HUB SHOP USA
3-1/2" Dry/Wet Multipurpose Core Bit for Masonry, Concrete and Natural Stone, 6" Drilling Depth, 5/8"-11 Arbor

No reviews

Regular price $68.34
Vendor: HUB SHOP USA
3PCS Rock Plate Flat Grinding Blade Tile Chamfering Cutting and Sanding Blade

No reviews

Regular price $12.67
Vendor: HUB SHOP USA
4 1/2 Inch Diamond Cutting Wheel for Metal, 4.5 Inch Cut off Wheel Angle Grinder Cutting Disc with 5000+ Cuts on Rebar, Steel, Iron and INOX (3 Pcs)

No reviews

Regular price $22.44
Vendor: HUB SHOP USA
4 Inch Wet Core Drill Bits, 4" Core Bit for Concrete, 14" Drilling Depth, 1-1/4"-7 Thread Diamond Core Bit for Cured Concrete with Rebar, Hard Masonry, Brick Block, Stucco, Stone (102Mm)

No reviews

Regular price $74.49
Vendor: HUB SHOP USA
4" Wet Core Drill Bits with 1-1/4"-7 Thread Featuring 15.74" Drilling Depth 10Mm Diamond Segment Specifically Designed for Heavy-Duty Applications in Reinforced Concrete Brick and Masonry

No reviews

Regular price $74.52
Vendor: HUB SHOP USA
4-1/2 Inch Segmented Diamond Blade, Diamond Cutting Wheel for Angle Grinder Stone Master, 4.5" Stone Blade for Cutting Concrete Granite Masonry Brick, 7/8"-20Mm-5/8 Arbor (2-Pack)

No reviews

Regular price $25.01
Vendor: HUB SHOP USA
4/4.5Inch Diamond Cutting Wheel Wet Dry Cutting Saw Blade/Disc Grinder Wheel

No reviews

Regular price From $18.11

Special Offers

Free Shipping above $500
Free for all orders over $500 worldwide
30 days return policy
Order without worry
Flexible Delivery Time
Choose your delivery time

Let customers speak for us

from 20 reviews

Good product

KEC

09/06/2025

HUB SHOP USA

Excellent product!

Great quality! Good price. Will order again from this company. Fast shipping.

Burnie Whitson

09/05/2025

Fast cutting, long lasting.

Always like using ezark. Good price.

N21K

08/31/2025

Nice tool

Works as expected

T. Schmidt

08/26/2025

Affordable replacement part

These work well in my DeWalt multitool. They were clearly marked so I knew what types of materials I could use them on.

Joshua Kirk

08/25/2025

Perfect for what I needed.

alm

08/06/2025

Best bang for the buck to date, by far

I've tried lots and lots of oscillator blades. These are some of the best I've used... But bang for the buck they blow the others out of the water. Like all the others, just stay away from screws and nails

Adam B.

08/04/2025

Great clean cut blades

These are excellent for wood / sheetrock cutting. The flared end makes it easy to get close to edges without the tool getting in the way. The teeth are aggressive so cutting through wood is a breeze.They do not however do well with nails but they sail through clean wood. Despite the less than optimal nail performance these are still my go-to blades for simple jobs. If I know I'm cutting out old trim or something that might have nails then I'll opt for something else but this is on my tool 98% of the time.

rab

08/01/2025

Oscillating tool blades

Fits well and so far stays sharp and cuts well. I use this tool and blades a lot on a variety of omaterials

David White

07/25/2025

Surprisingly clean cut

The Japanese tooth design of these blades caught my eye so I purchased a few to try out. After testing them in some scrap poplar that was left over from a cabinet door build I'm very impressed with the quality of the cut. Both rip and crosscut were almost as smooth as what I get on the table saw. The teeth are very sharp, they cut fast, and there was no noticeable tear out on either side. These blades produce a lot of very fine dust so you'll want to have a dust collector running somewhere near you cut if you can. I haven't used them enough to determine how long they'll last, but I'm very impressed with the quality of the cut.I'm using a DeWalt DCS356 20 Volt Max Oscillating Tool with the quick blade change feature, and these fit perfectly.These will be a permanent addition to my selection of blades.

Albert S Price

07/15/2025

These worked out great

I had been trying to decide whether I should buy the long one or the shorter one. I wanted to cut a piece out of a 2x4 wood. I ended up choosing the long ones that can cut metal and wood. These turned out great! I have a Dremel brand oscillating saw and it was easy to install and use. It felt very secure and did not fall off. These look and feel high quality.

Sara_823

06/27/2025

Great for getting through wood, but be careful of nails.

Worked great for getting through wood. Since these are specifically designed for wood they cut cleaner, don't leave burn marks and are faster then your all purpose blades. I would highly recommend getting material specific blades and stop relying on your multi purpose blades so much. Do be careful if you have nails in the wood. Nails will destroy these blades.

J. Loomis

06/02/2025

Cut great!

I did a quick comparison with these against a Hercules wood/plastic blade in my oscillating tool from Porter cable. There’s not even a comparison. These cut WAY FASTER to a degree that almost makes this my new favorite tool. I never felt like my oscillating tool cut well at all and basically used it as a sander primarily but I’ve now figured out that the other blades I had were the problem. I’m glad I got these because they cut great and will make a big difference with some future projects I have

ken

05/13/2025

Works great when cutting off palm tree branches.

So far so good. I have used these mainly to cut palm tree branches. It does cut very well and it was a good deal as well. I will update review if I use it for anything else and if it works better or worse than expected. I do recommend it at this point for cutting anything wood related.

Norm

04/28/2025

Filter and sort

Products

Special Offers

Free Shipping above $500

30 days return policy

Flexible Delivery Time

Let customers speak for us

Compare products