Filter and sort

Core Bits

| EBM 352/3 PSA | 14" Capacity, 110 V, Concrete Core Drilling Rig with Anchor Stand. Wet Diamond Core Drill - 3-Speed for Concrete, Brick, Block, Asphalt, and Stone - Made in Germany

Vendor: HUB SHOP USA
| EBM 352/3 PSA | 14" Capacity, 110 V, Concrete Core Drilling Rig with Anchor Stand. Wet Diamond Core Drill - 3-Speed for Concrete, Brick, Block, Asphalt, and Stone - Made in Germany

No reviews

Regular price $3,394.23
Vendor: HUB SHOP USA
Diamond Core Drilling Machine 1700W Handheld Variable Speed Wet Dry Core Drilling Rig 1-1/4" Thread, 4.7" Max Drilling Capacity for Masonry, Block Stone

No reviews

Regular price $111.64
Vendor: HUB SHOP USA
| ETN 2001 P | Wet & Dry Diamond Core Drill. High-Torque, Heavy-Duty, Hand-Held, and Dual-Speed. Ideal for Drilling up to 3” in Diameter in Brick, Concrete, and Asphalt – Made in Germany

No reviews

Regular price $1,598.65
Vendor: HUB SHOP USA
1 1/2 Inch Wet Core Drill Bit, 1.5" Core Bits for Concrete, 14" Drilling Depth, 1-1/4"-7 Thread Diamond Core Drill for Cured Concrete, Hard Masonry, Brick, Solid Cement, Stucco, Stone (38Mm)

No reviews

Regular price $54.36
Vendor: HUB SHOP USA
1" Dry Core Drill Bit, 5/8"-11 Thread, with 3 Adapters Included: SDS Plus, SDS Max and 1/2" Hex Shank -9.5" Drilling Depth Diamond Core Bits for Concrete, Brick, Block, Stucco and Masonry

No reviews

Regular price $47.31
Vendor: HUB SHOP USA
CORE DRILL PACKAGE DEAL 4Z1 2-SPEED CONCRETE CORING DRILL by TOOLS COMES with 1", 2", 3", & 4" BITS

No reviews

Regular price $790.82
Vendor: HUB SHOP USA
2-1/2" Pro Dry Core Drill Bit with Pilot Bit & 3 Adapters (SDS Plus/Sds Max/1/2 Hex), Upgraded-Welded Core Bits for Concrete with Rebar, Masonry, Brick, Mortar - 9.5" Depth, 5/8"-11 Thread

No reviews

Regular price $85.66
Vendor: HUB SHOP USA
Diamond Core Drilling Machine, 0.8-8 in Drilling Diameter, Stand-Mount Dry and Wet Concrete Core Drill Rig with 8 Drill Bits, 800 RPM Speed, UNC1 1/4-7 Thread, for Concrete Brick Stone, 3000W

No reviews

Regular price $816.79
Vendor: HUB SHOP USA
Diamond Core Drilling Machine, Handheld Dry and Wet Core Drill Rig, 1-1/4"Threaded Shaft, Equipped with Wet Drill Bits 1.25", 2.5", 3.25",4"And Water Pump Set, for Concrete Bricks and Stones

No reviews

Regular price $359.06
Vendor: HUB SHOP USA
Diamond Core Drilling Machine, 8In Wet&Dry Concrete Core Drill Rig with Stand, 750RPM Speed & 1-1/4" 5/8" Thread & Lifting Handle, 8In Drilling Diameter for Concrete Brick Block Stone, 2500W

No reviews

Regular price $300.77
Vendor: HUB SHOP USA
2 1/2 Inch Dry Core Drill Bit with Pilot Bit and 2 Pcs Adapters (SDS plus Adapter&Hex Adapter), 5/8"-11 Threaded Diamond Core Bit for Concrete/Brick/Masonry, 10" Drilling Depth

No reviews

Regular price $62.15
Vendor: HUB SHOP USA
3-1/2" Dry/Wet Multipurpose Core Bit for Masonry, Concrete and Natural Stone, 6" Drilling Depth, 5/8"-11 Arbor

No reviews

Regular price $68.34

Special Offers

Free Shipping above $500
Free for all orders over $500 worldwide
30 days return policy
Order without worry
Flexible Delivery Time
Choose your delivery time

Let customers speak for us

from 20 reviews

Good product

KEC

09/06/2025

HUB SHOP USA

Excellent product!

Great quality! Good price. Will order again from this company. Fast shipping.

Burnie Whitson

09/05/2025

Fast cutting, long lasting.

Always like using ezark. Good price.

N21K

08/31/2025

Nice tool

Works as expected

T. Schmidt

08/26/2025

Affordable replacement part

These work well in my DeWalt multitool. They were clearly marked so I knew what types of materials I could use them on.

Joshua Kirk

08/25/2025

Perfect for what I needed.

alm

08/06/2025

Best bang for the buck to date, by far

I've tried lots and lots of oscillator blades. These are some of the best I've used... But bang for the buck they blow the others out of the water. Like all the others, just stay away from screws and nails

Adam B.

08/04/2025

Great clean cut blades

These are excellent for wood / sheetrock cutting. The flared end makes it easy to get close to edges without the tool getting in the way. The teeth are aggressive so cutting through wood is a breeze.They do not however do well with nails but they sail through clean wood. Despite the less than optimal nail performance these are still my go-to blades for simple jobs. If I know I'm cutting out old trim or something that might have nails then I'll opt for something else but this is on my tool 98% of the time.

rab

08/01/2025

Oscillating tool blades

Fits well and so far stays sharp and cuts well. I use this tool and blades a lot on a variety of omaterials

David White

07/25/2025

Surprisingly clean cut

The Japanese tooth design of these blades caught my eye so I purchased a few to try out. After testing them in some scrap poplar that was left over from a cabinet door build I'm very impressed with the quality of the cut. Both rip and crosscut were almost as smooth as what I get on the table saw. The teeth are very sharp, they cut fast, and there was no noticeable tear out on either side. These blades produce a lot of very fine dust so you'll want to have a dust collector running somewhere near you cut if you can. I haven't used them enough to determine how long they'll last, but I'm very impressed with the quality of the cut.I'm using a DeWalt DCS356 20 Volt Max Oscillating Tool with the quick blade change feature, and these fit perfectly.These will be a permanent addition to my selection of blades.

Albert S Price

07/15/2025

These worked out great

I had been trying to decide whether I should buy the long one or the shorter one. I wanted to cut a piece out of a 2x4 wood. I ended up choosing the long ones that can cut metal and wood. These turned out great! I have a Dremel brand oscillating saw and it was easy to install and use. It felt very secure and did not fall off. These look and feel high quality.

Sara_823

06/27/2025

Great for getting through wood, but be careful of nails.

Worked great for getting through wood. Since these are specifically designed for wood they cut cleaner, don't leave burn marks and are faster then your all purpose blades. I would highly recommend getting material specific blades and stop relying on your multi purpose blades so much. Do be careful if you have nails in the wood. Nails will destroy these blades.

J. Loomis

06/02/2025

Cut great!

I did a quick comparison with these against a Hercules wood/plastic blade in my oscillating tool from Porter cable. There’s not even a comparison. These cut WAY FASTER to a degree that almost makes this my new favorite tool. I never felt like my oscillating tool cut well at all and basically used it as a sander primarily but I’ve now figured out that the other blades I had were the problem. I’m glad I got these because they cut great and will make a big difference with some future projects I have

ken

05/13/2025

Works great when cutting off palm tree branches.

So far so good. I have used these mainly to cut palm tree branches. It does cut very well and it was a good deal as well. I will update review if I use it for anything else and if it works better or worse than expected. I do recommend it at this point for cutting anything wood related.

Norm

04/28/2025

Filter and sort

Core Bits

Special Offers

Free Shipping above $500

30 days return policy

Flexible Delivery Time

Let customers speak for us

Compare products